Product detail · Fixing parts
Fuser rollers, upper and lower
Upper and lower fuser rollers, ordered by copier model — with films and fuser units alongside.
- 2Roller lines: upper + lower
- 1Changed together when both are aged
- 3Fixing lines: rollers, films, units
- 0Universal sizes
Fuser rollers: the upper and lower rollers as their own line
Guangzhou Xinxiangyin's parts range carries the upper fuser roller and the lower (pressure) roller as their own catalogue line （定影上辊 / 定影下辊）. Rollers are bought by copier model, and the part type a machine takes is a property of that machine's design — order by model.
Fixing parts are quoted against the copier model they serve. Knowing which design a machine uses is the first line of the enquiry — after that, the model is stated and the roller is quoted against it. The two fixing part types — films and rollers — are separate lines in this catalogue, and neither is quoted as a substitute for the other: the model's own design decides which type it takes, and the enquiry states the model.
What worn rollers look like on the page
- Toner rubbing off, weak fixing — candidates include surface wear and pressure loss at the nip; work through the model's own diagnostic sequence to confirm which, before parts are ordered.
- Repeating marks at a regular interval — one of the fixing rollers is one candidate among the machine's rotating parts; the model's own diagnostic sequence, not the repeat distance alone, separates them.
- Wrinkles and creasing — a deformed or swollen lower roller is one candidate; the feed path can crease a sheet as well, so confirm against the model's own sequence.
- Offset and ghosting — the upper roller is one candidate; offset can also start on the imaging side, and the model's own sequence separates the two.
When both rollers are aged, service them as a pair — a grooved pressure roller will wear a fresh upper surface early. If the whole assembly is tired, the complete-unit route is on the fuser units page.
Are upper rollers and fuser films interchangeable choices?
No. Which of the two a machine takes is a property of that machine's own design — order the part type listed for your model.
Can a roller be re-coated instead of replaced?
Re-coating is not offered as a bench service here. For office-copier volumes, replacement by model is the practical route.
Do rollers ship with bearings and gears?
Configuration varies by model; state whether you need the bare roller or the dressed assembly and it will be quoted accordingly.
Are these genuine parts?
No — independent compatible parts matched by machine model; brand names identify fitment only.
How roller orders are put together
Rollers are their own line of the fixing range, listed per machine model. When you enquire, name the models the rollers are for: ask for the rollers to be matched per machine, and how a mixed-model order is packed and shipped is confirmed on the quotation for that order. Films, rollers and fuser units are three separate routes into the same fixing job; ask for each to be quoted against the model separately.
Quote fuser rollers by copier model
Send the cartridge or part numbers you buy now, the copier models they go into and your destination port. Ask for the quotation model by model, with the packing details for your order. On the company's Alibaba storefront, recent listings show cartridges starting from as low as 1–12 pieces and toner from 1–2 bags, so a trial order does not need a container behind it.